PELATIHAN HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

TRAINING HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

OBJECTIVES PELATIHAN HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

1. Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

OUTLINES TRAINING HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Introduction
1. The role and responsibility of each member of discipline
2. The different type of project that proses engineering are involved with
3. The complexities of a project
4. A basic understanding of the deliverables each type of project.
5. A basic understanding of the schedule for the different type of project

Process Simulator
1. What is process simulator
1. What are they
2. How they are used
3. How to determine the suitable one
2. Process simulator needs
1. Component and component behavior
2. Process flowsheet or description
3. Operating condition or design specification
4. Calculate steady state process of heat and mass flow
5. Model the surface facilities and gas plant
6. Design or process evaluation
3. Step to modular simulation(Hysis)
1. Specify component and thermodynamic model
2. Define process configuration
3. Specify stream or unit operation connectivity
4. Operation parameters are ready
5. Run simulation
6. Result Checking
7. Check the simulation result is in line with the real design practice
8. Verify the result

Process Simulation Unit Operation
1. Select Hysis calculation block to represent process equipment
2. Understanding of unit operation in Hysis
3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust
1. Describe the characteristic of feed forward controller
2. Describe the characteristic of feedback controller
3. Understand how to use SET as feed forward controller
4. Understand how to ADJUST as feedback controller

Process Simulation – Crude Stabilizer
1. Understand stream mixing and splitting block
2. Understand pressure change block
3. Select suitable heat transfer block
4. Model a simple crude stabilizer

Recycle Stream
1. Select suitable tear stream
2. Installing recycle loop stream

INSTRUKTUR

Sigit Budi, ST., MT and team

PARTICIPANTS PELATIHAN HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Senior operators, Junior operators, Junior production engineers and supervisors, Well service engineers and supervisors, Materials, Logistics and warehouse personnel, Work over and Well services engineers and supervisors

METODE TRAINING HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Lecturing, presentasi, diskusi interaktif, sharing, studi kasus

Jadwal Pelatihan Transform-mpi.com 2023 :

• Batch 1 : 11 – 12 Januari 2023 | 25 – 26 Januari 2023
• Batch 2 : 01 – 02 Februari 2023 | 15 – 16 Februari 2023
• Batch 3 : 01 – 02 Maret 2023 | 15 – 16 Maret 2023
• Batch 4 : 04 – 05 April 2023 | 11 – 12 April 2023
• Batch 5 : 10 – 11 Mei 2023 | 24 – 25 Mei 2023
• Batch 6 : 07 – 08 Juni 2023 | 21 – 22 Juni 2023
• Batch 7 : 12 – 13 Juli 2023 | 26 – 27 Juli 2023
• Batch 8 : 09 – 10 Agustus 2023 | 23 – 24 Agustus 2023
• Batch 9 : 06 – 07 September 2023 | 20 – 21 September 2023
• Batch 10 : 04 – 05 Oktober 2023 | 18 – 19 Oktober 2023
• Batch 11 : 01 – 02 November 2023 | 15 – 16 November 2023
• Batch 12 : 05 – 06 Desember 2023 | 12 – 13 Desember 2023

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

• Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
• Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
• Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
• Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp.6.800.000 / peserta(Minimal 2 Peserta).
• Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta(Minimal 2 Peserta).
• Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
• Lombok : Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

Fasilitas Pelatihan di transform-mpi.com:

1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
3. Transportasi Peserta ke tempat pelatihan.
4. 2x Coffe Break & 1 Lunch (Makan Siang).
5. Training Room Full AC and Multimedia.
6. Free Bag or Bagpackers (Tas Training).
7. Softfile Foto Training
8. Sertifikat Pelatihan.
9. Souvenir Exclusive.