PELATIHAN FURNACE: OPERATION AND OPTIMIZATION IN SAFETY
TRAINING FURNACE: OPERATION AND OPTIMIZATION IN SAFETY
DESCRIPTION PELATIHAN FURNACE: OPERATION AND OPTIMIZATION IN SAFETY
To provide in-depth knowledge of furnace operation in the petroleum and petrochemical industries. The course places special emphasis on abnormal situations liable to lead to incidents and therefore addresses questions of safety arising from furnace operation. On completion of the course, the participants: have a better knowledge of industrial furnaces technology, operating conditions and constraints, and their signification; manage on stream operation rules in safety; know the main maximum operating values and material operating limits; have mastered these constraints for an optimal furnace.
OBJECTIVES TRAINING FURNACE: OPERATION AND OPTIMIZATION IN SAFETY
* have a better knowledge of industrial furnaces technology, operating conditions and constraints, and their signification
* are able to identify the different operating constraints and their signification
* know the main maximum operating values and material operating limits
* have mastered these constraints for an optimal furnace operation in safety and fiability.
OUTLINES PELATIHAN FURNACE: OPERATION AND OPTIMIZATION IN SAFETY
1. FURNACE CONSTRUCTION AND OPERATING CONDITIONS
* Different types of furnaces and their functions
* Operating conditions
* Distribution of heat supplied
* Furnace efficiency
* Estimation rule parameters governing furnace efficiency, scope and limitations for improving furnace efficiency.
* Construction of heat exchange areas, insulation, refractory materials: technology, type of materials used.
2. FLUE GAS CIRCULATION
* Natural draft: stack role, pressure profile inside a furnace
* Parameters governing draft and negative pressure control. Forced draft: draft fan role. Draft control.
3. COMBUSTION – FUEL – BURNERS
* Combustion conditions: heating value, liquid and gas fuel characteristics, liquid spray.
* Implementation of combustion: introduction of fuel and air, achieving their mixture, burner operation.
* Combustion quality: analysis of the oxygen and the unburned material in the flue gases, control of the combustion air flow rate, air-fuel constraints.
* Combustion safety: flame detection, control and safety devices on the fuel circuits.
* Combustion constraints and burner operation limits.
4. HEATING
* Heat transfer to the tube bundle: heat flux, tube temperatures, fouling effects. Parameters governing heat transfer: flue gas temperature and mass flow-fuel emissivity.
* Division of the heated fluid into several passes: control and regulation of the \ division, low flow rate safety systems.
* Heating control: flow constraints of the fuel at outlet temperature.
5. FURNACE OPERATION
* On-stream furnace operations: monitoring of combustion and heating – Modifying operating conditions – Analysis of disturbances – Stack sweeping.
* Startup and shutdown: preparation, safe ignition procedures, ignition after a short shutdown, normal shutdown, emergency shutdown. Incidents: explosive
* atmosphere in the combustion chamber, tube rupture, unbalancing, etc.
INSTRUCTOR
Dr. Herliansyah, ST., M.Eng
WHO SHOULD ATTEND
All personnel involved in furnace operation and optimization: operators, panelmen, supervisors and engineers.
METHOD TRAINING FURNACE: OPERATION AND OPTIMIZATION IN SAFETY
Lecturing, workshop, interactive discussion, sharing and case study.
Jadwal Pelatihan Transform-mpi.com 2024 :
- Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024
- Batch 2 : 07 – 08 Februari 2024 | 20 – 21 Februari 2024
- Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024
- Batch 4 : 09 – 10 April 2024 | 13 – 24 April 2024
- Batch 5 : 07 – 08 Mei 2024 | 22 – 23 Mei 2024
- Batch 6 : 05 – 06 Juni 2024 | 25 – 29 Juni 2024
- Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024
- Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024
- Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024
- Batch 10 : 18 – 19 Oktober 2024 | 15 – 16 Oktober 2024
- Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024
- Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024
Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.
Biaya dan Lokasi Pelatihan :
- Jakarta :
- Bandung
- Yogyakarta
- Surabaya
- Malang
- Bali
- Lombok
Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.
Fasilitas Pelatihan di transform-mpi.com:
- Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
- Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
- Transportasi Peserta ke tempat pelatihan.
- 2x Coffe Break & 1 Lunch (Makan Siang).
- Training Room Full AC and Multimedia.
- Free Bag or Bagpackers (Tas Training).
- Softfile Foto Training
- Sertifikat Pelatihan.
- Souvenir Exclusive.
