Flow Assurance In Pipeline System

Pelatihan Flow Assurance In Pipeline System

Training Flow Assurance In Pipeline System

Flow Assurance In Pipeline System Outlines Pelatihan Flow Assurance In Pipeline System

• Introduction to Onshore and Offshore Pipeline Flow Assurance
• Economical Flow from Reservoir to the point of sale
• Identification of Critical problems and Blockage in pipelines
• Handling of Solid deposits
• Application of Fluid Mechanics in Pipeline Operations Integrity
• Avoiding Surging problem and High Viscosity liquid flow Failure
• Evaluation of Chemical Injection and Pigging
• Potential challenges in pipeline operations
• Introduction to oil and gas fluid transportation – platforms, risers, floating production units, pipeline • •
to shore and to storage or refineries
• Reservoir fluid properties – oil, gas, condensate and water
• Fluid data and phase determination
• The causes and operational responses to pipeline flow failures
• Emulsion and multiphase fluid flow phenomena
• Fluid flow analysis – single and multiphase
• Surging and slugging
• Slug formation and prediction
• Riser slugging and surge analysis
• Slug catcher types and operations
• Deposition of paraffin, wax, asphaltene and naphtenates
• The chemistry of hydrocarbon deposits
• Prevention and remediation of wax formation and deposition
• Scaling – prediction of scale precipitation
• Sand production – deposition and pipeline erosion
• Hydrate formation – blockage and corrosion
• Hydrate prevention and control
• SRB attack – internal pipeline corrosion control
• Chemical injection – emulsion breaker, corrosion inhibitor, scale inhibitor, biocides, paraffin inhibitor, flow
improver
• Pigging – pig types and operations
• The prediction of flows in production risers
• Fluid mechanics of multiphase flow in pipeline
• Transient multiphase simulation tools
• Start-up and shutdown issues

Instructor

Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider‐OMRON PLC Training Center, Maranatha Christian University, Bandung. He is the chairman of National Student Competition on PLC
Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in‐house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI‐Bandung, LAPI‐ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources
Indonesia.

Jadwal Pelatihan Transform-mpi.com 2024 :

  • Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024
  • Batch 2 : 07 – 08 Februari 2024 | 20 – 21 Februari 2024
  • Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024
  • Batch 4 : 09 – 10 April 2024 | 13 – 24 April 2024
  • Batch 5 : 07 – 08 Mei 2024 | 22 – 23 Mei 2024
  • Batch 6 : 05 – 06 Juni 2024 | 25 – 29 Juni 2024
  • Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024
  • Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024
  • Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024
  • Batch 10 : 18 – 19 Oktober 2024 | 15 – 16 Oktober 2024
  • Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024
  • Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

  • Jakarta :
  • Bandung
  • Yogyakarta
  • Surabaya
  • Malang
  • Bali
  • Lombok

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.