CONTROL VALVES AND ACTUATORS

PELATIHAN CONTROL VALVES AND ACTUATORS

TRAINING CONTROL VALVES AND ACTUATORS

TRAINING CONTROL VALVES AND ACTUATORS

TRAINING CONTROL VALVES AND ACTUATORS

Deskripsi Pelatihan Control Valves and Actuators

Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance

Tujuan Training Control Valves and Actuators

  • Compare various types of final control elements
  • Understand a typical valve operation in a control loop
  • Differentiate between various types of valves and the benefits of each
  • Compare rising stem to rotary style valves
  • Analyze a control system to determine control valve needs
  • Use ISA standards for control valve specification and selection
  • Size valves for any flow condition likely to be found in a process plant
  • Evaluate and select actuators for specific applications
  • Specify appropriate auxiliaries including positioners and I/P transducers
  • Design control valve installations that are safe and trouble-free

Sertifikat Pelatihan Control Valves and Actuators

Setelah mengikuti training ini, bagi peserta yang lolos kualifikasi akan mendapatkan sertifikat dari lembaga pelaksana training

Materi Training Control Valves and Actuators

  1. Introduction:
    • Valve in Loop,
    • Actuator,
    • Positioner
  2. Basic Valve Types:
    • Globe Valves,
    • Ball Valves,
    • Plug Valves,
    • Butterfly Valves
  3. Actuators:
    • Spring/Diaphragm,
    • Piston,
    • Vane,
    • Scotch-Yoke,
    • R & P
  4. Comparison:
    • Rising Stem,
    • Rotary Stem,
    • Accessories,
    • Positioner,
    • I/P Converters
  5. Valve Performance:
    • Gain,
    • Time,
    • Trim,
    • Special Needs
  6. Flashing/Cavitation & Noise:
    • Cause/Effect,
    • Prevention,
    • OSHA,
    • Source and Abatement
  7. Installation:
    • Performance, Safety and Others
  8. Valve Sizing:
    • Valve sizing calculation Manual,
    • Valve Sizing calculation Computer
  9. Specification and Selection:
    • Process Requirements,
    • Other Considerations
  10. Maintenance and Troubleshooting Considerations:
    • Special Requirements,
    • Diagnostic Tools
  11. Smart Valves:
    • Available Designs,
    • Applications in Industry
  12. Test valves to evaluate performance factors
  13. Size valves manually and with software
  14. Specify valves, actuators, and auxiliaries for specific applications
  15. Evaluate operation of valves with pneumatic actuators and positioners
  16. Smart valve/positioner operation demonstration

Peserta Pelatihan Control Valves and Actuators

This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.

Instruktur

Instruktur yang mengajar pelatihan Control Valves And Actuators ini adalah instruktur yang berkompeten di bidang Control Valves And Actuators baik dari kalangan akademisi maupun praktisi.

Jadwal Pelatihan Transform-mpi.com 2025 :

  • Batch 1 : 30 – 31 Januari 2025
  • Batch 2 : 13 – 14 Februari 2025
  • Batch 3 : 11 – 12 Maret 2025
  • Batch 4 : 16 – 17 April 2025
  • Batch 5 : 15 – 16 Mei 2025
  • Batch 6 : 25 – 26 Juni 2025
  • Batch 7 : 16 – 17 Juli 2025
  • Batch 8 : 6 – 7 Agustus 2025
  • Batch 9 : 3 – 4 September 2025
  • Batch 10 : 8 – 9 Oktober 2025 || 29 – 30 Oktober 2025
  • Batch 11 : 13 – 14 November 2025 || 25 – 27 November 2025
  • Batch 12 : 15 – 16 Desember 2025

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

  • Jakarta :
  • Bandung
  • Yogyakarta
  • Surabaya
  • Malang
  • Bali
  • Lombok

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.