PELATIHAN Piping Design

PELATIHAN Piping Design Construction and Mechanical Integrity

TRAINING TENTANG Piping Design Construction and Mechanical Integrity

PELATIHAN Piping DesignDESCRIPTION PELATIHAN Piping Design Construction and Mechanical Integrity

This course is designed to provide the participants with a complete and up-to-date overview of the Process Piping Technology .It covers Code requirements from design through start-up of new piping systems, as well as standards for inspection and repair of piping systems that have been in service, as provided in API 570, Piping Inspection Code and API 579 Fitness for Service. General topics in the course include: Overview of ASME B 31.3 code, pressure design of piping components, selection of flanges, flexibility considerations, materials, impact testing, fabrication, examination and testing. The course further provides concepts and methods for assuring the mechanical integrity of existing piping systems. It presents a thorough understanding of how the methodology of API 570 as well as API 579 can be applied for assessing the present structural integrity of the piping component, and deciding its fitness for continued service as well as the projected remaining life. It also suggests remedial measures
for mitigation of damage and thus extend the life of the Piping System.
WHO SHOULD ATTEND

This course provides an overview of all significant aspects and considerations of piping for those who are involved in the design, analysis, fabrication, installation, and maintenance of piping systems. Engineers, Senior Draftsmen, Inspection, maintenance, and quality assurance personnel who work in the Chemical, Petroleum, Utilities, Petrochemical Plants, Fertilizer Plants etc, will find it a time-saving means to broaden and update their knowledge of piping. Those are involved in Asset Integrity Management and Fitness For Service assessments will find the course most valuable.
OBJECTIVE
1. To familiarize participants with the main concepts,of the B 31.3 code.
2. To provide participants step-by step approach in use of B 31.3 code for Design, fabrication, installation, inspection and testing.
3. How to Conduct and certify the pressure testing.
4. To learn the mode of deterioration of piping systems and pipelines
5. Be able to recognize causes of degradation in-service, and apply integrity analysis techniques to make run-repair-replace decisions.
6. To know about pipeline inspection and also how to evaluate and analyze the Inspection data
7. To know how to calculate corrosion rate, interval of inspection and similar parameters of piping inspection
8. To learn different methods of piping and pipeline repairs, alteration and rerating
9. The participant will be introduced to the latest techniques in piping and pipeline integrity

SUMMARY OUTLINE
1. Piping Codes Overview, ASME B 31.3
2. Fluid service categories
3. Pressure Design of Pipes.
4. Pressure Design of Blanks
5. Case studies on Pipe Design
6. Branches and reinforcements
7. Pipe Material Requirements
8. Impact testing requirements
9. Preheating and PWHT
10. Fabrication and welding
11. Inspection, Examination and Testing
12. NDT of Piping System
13. Pressure testing of pipes
14. Piping Thermal Expansion
15. Flanges ASME B 16.5
16. In-service Degradation of pipes
17. API 570 methodology for Integrity assessment
18. Remaining life assessment
19. Repairs and alterations piping system
20. Pipe retirement thickness
21. Re-rating of Existing piping
22. Integrity assessment of buried piping
23. Evaluation of Inspection data
24. API 579 fitness-for-service assessment procedure
25. Concept of Remaining strength factor
26. Assessment of general metal loss
27. Assessment of crack-like flaws
28. Documentation and Records
29. Final Exam and feed back

COURSE METHOD
* Presentation
* Discuss
* Case Study
* Evaluation
* Simulation

Jadwal Pelatihan Transform-mpi.com 2020 :

  • 15 sd 16 Januari 2020
  • 29 sd 30 Januari 2020
  • 12 sd 13 Februari 2020
  • 26 sd 27 Februari 2020
  • 11 sd 12 Maret 2020
  • 18 sd 19 Maret 2020
  • 15 sd 16 April 2020
  • 22 sd 23 April 2020
  • 5 sd 6 Mei 2020
  • 13 sd 14 Mei 2020
  • 10 sd 11 Juni 2020
  • 24 sd 25 Juni 2020
  • 8 sd 9 Juli 2020
  • 22 sd 23 Juli 2020
  • 12 sd 13 Agustus 2020
  • 26 sd 27 Agustus 2020
  • 9 sd 10 September 2020
  • 23 sd 24 September 2020
  • 7 sd 8 Oktober 2020
  • 21 sd 22 Oktober 2020
  • 4 sd 5 November 2020
  • 14 sd 19 November 2020
  • 2 sd 3 Desember 2020
  • 16 sd 17 Desember 2020

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
  • Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
  • Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp.6.800.000 / peserta(Minimal 2 Peserta).
  • Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta(Minimal 2 Peserta).
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
  • Lombok : Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.

Leave a Reply

Your email address will not be published. Required fields are marked *