Daftar isi :

TRAINING TENTANG BLOWOUT PREVENTION AND WELL CONTROL

PELATIHAN BLOWOUT PREVENTION AND WELL CONTROL

BACKGROUND

Merupakan salah satu masalah lubang sumur di operasi pemboran
Menyebabkan timbulnya biaya ekstra yang cukup besar
Berpotensi menyebabkan hilangnya sebagian atau semua fasilitas pemboran di lapangan karena kick dan blowout yang tidak terkontrol
Menunda waktu produksi sumur (POP)

OBJECTIVES PELATIHAN BLOWOUT PREVENTION AND WELL CONTROL

Mengetahui gejala kejadian kick dan blowout.
Mengetahui kerugian akibat kick yang tidak terkontrol atau blowout.
Mengetahui usaha pencegahan terjadinya blowout.
Mengetahui cara mengidentifikasi mekanisme kick yang terjadi.
Mengetahui kronologi terjadinya kick dan blowout dan cara penanggulangannya dengan Well Control.

PRE-REQUISITE

* Operator/ Sr. Operator/ Jr. Engineer/ Non Engineer
* Petroleum Engineers, Reservoir Engineers, Production Engineers
* Well Service Engineers
* Everybody or professionals who wants to better understanding and broaden their knowledge from the course subject

COURSE OUTLINE BLOWOUT PREVENTION AND WELL CONTROL

Well Control Introduction
- Introduction to course
- Basic Concepts
- Liquid Hydrostatics
Gas Behavior and Hydrostatics
- Ideal Gases
- Effect of Temperature
- Real Gases
- Critical Temperature & Pressure
- Pseudo-Critical Temp. and Press.
- Gas Compressibility
- Gas Migration
Kick and Gas Migration
- Density of real gasses
- Equivalent Mud Weight (EMW)
- Wellbore pressure before and after kick
- Gas migration rate – first order approx.
- Gas migration rate – w/mud compressibility
Gas Solubility
- Solubility of Hydrocarbon Gasses in Oil
- Solubility of Non-Hydrocarbon Gasses in Oil
- Solution Volume Factors
- Oil Mud Recommendations
Pore Pressure Prediction
- Mud Weight and Pore Pressure
- Mud Weight and Fracture Gradient
- Normal Pore Pressure
- Subnormal Pore Pressure
- Abnormal Pore Pressure
- Origins of Pore Pressure
- Bulk Density and Porosity vs. Depth
Drilling Rate and Pore Pressure
- Forces on Subsurface Rock
- d-exponent
- dc-exponent
- Rehm and McClendon
- Zamora
- Comb’s Method
- Bourgoyne and Young’s Method
Other Indicators of Abnormal Pore Pressure
- Moore’s Equation – Drilling rate
- Gas in the Drilling Fluid
- Rock Sample Characteristics
- Use of Surge and Swab Pressure to determine Overbalance
- Changes in Drilling Fluid Properties
- Temperature Indications
- Hole Conditions
Logging While Drilling
- Sonic Travel Time
- Resistivity and Conductivity
- Eaton’s Equations (R, C, Dt, dc)
- Natural Gamma Ray
Fracture Gradients 1
- Allowable Wellbore Pressures
- Rock Mechanics Principles
- Hooke’s Law, Young’s Mudulus, Poisson’s Ratio
- Volumetric Strain, Bulk Modulus, Compressibility
- Triaxial Tests
- Rock Mechanics Principles (con’t.)
- Rock Properties from Sound Speed in Rocks’
- Mohr’s Circle
- Mohr-Coulomb Failure Criteria
Fracture Gradients 2
- Radial and Tangential Stresses near the Wellbore
- Stresses in Rock near Wellbore
- Effect of Anisotropic Stresses
- Onshore vs. Offshore Fracture Gradients
- Fracture Gradients in Inclined Wellbores
- Oil Based and Water Based Drilling Fluids
Fracture Gradients Determination
- Hubbert and Willis
- Matthews and Kelly
- Ben Eaton
- Christman
- Leak-Off Test (experimental)
Kick Detection and Control
- Primary and Secondary Well Control
- What Constitutes a Kick
- Why Kicks Occur
- Kick Detection Methods
- Shut-in Procedures
- Soft and Hard Shut-in
- Water Hammer
Off Bottom Kick
- Slugging of drillpipe
- Hole fill during trips
- Surge and Swab pressures
- Kick detection during trips
- Shut-In Procedures
- Blowout Case History
Control Pressures and Circulation Kill Techniques 1
- Shut-In Pressures
- Weighting Up the Mud
- Driller’s Method
- Wait & Weight Method
Control Pressures and Circulation Kill Techniques 2
- Wait & Weight Method
- Concurrent Method
- Annulus Pressure Profiles
- Kicks in Oil-Based Mud
Secondary Well Control Complications
- Volumetric Well Control
- Lubrication
- Complications During Conventional Kill
- Techniques to Reduce Annular Friction
Special Well Control Applications
- Underbalanced Drilling
- Well Control in Unconventional Hole Programs
- Casing and Cementing Operations
Equipments
- High Pressure Equipment
- Control System Equipment and Design
- BOP Inspection and Test Considerations
- Low-Pressure Equipment
- Equipment Arrangement: Design and Philosophy
- Casing
- Casing Heads and Spools
- Stack Equipment
- Choke and Kill Line Equipment
- Drillstem Control Equipment
Offshore Operations
- Equipment Used in Floating Drilling
- Operational Considerations in Floating Well Contr
- Shallow Gas Hazards
- Trends in Deepwater Drilling

PRE-REQUISITE :

Latar belakang : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

INSTRUCTOR :

Instruktur yang mengajar pelatihan Blowout Prevention And Well Control ini adalah instruktur yang berkompeten di bidang Blowout Prevention And Well Control baik dari kalangan akademisi maupun praktisi.

Jadwal Pelatihan Transform-mpi.com 2025 :

Batch 1 : 30 – 31 Januari 2025
Batch 2 : 13 – 14 Februari 2025
Batch 3 : 11 – 12 Maret 2025
Batch 4 : 16 – 17 April 2025
Batch 5 : 15 – 16 Mei 2025
Batch 6 : 25 – 26 Juni 2025
Batch 7 : 16 – 17 Juli 2025
Batch 8 : 6 – 7 Agustus 2025
Batch 9 : 3 – 4 September 2025
Batch 10 : 8 – 9 Oktober 2025 || 29 – 30 Oktober 2025
Batch 11 : 13 – 14 November 2025 || 25 – 27 November 2025
Batch 12 : 15 – 16 Desember 2025

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

Jakarta :
Bandung
Yogyakarta
Surabaya
Malang
Bali
Lombok

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.