PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING
PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION)
INTRODUCTION PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION):
SCADA has traditionally meant a window into the process of a plant and / or a method of gathering of data from devices in the field. Today, the focus is on integrating this process data into the actual business, and using it in real time. In addition to this, today’s emphasis is on using Open Standards, such as communication protocols (eg IEC 60870, DNP3 and TCP/IP) and ‘off-the-shelf’ hardware and software, as well as focusing on keeping the costs down. PLCs continue to gain in popularity. In fact, many SCADA applications use PLCs as the RTU of choice, when communicating with field devices. This comprehensive course covers the essentials of SCADA and PLC systems, which are often used in close association with each other.
TRAINING OBJECTIVE PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION)
After completing this course, the participants should be able to understand the concepts of SCADA Systems, build and configure the MTU and RTU modules, program the MTU and RTU, use sequential and PID controller implementation of MTU and RTU. Input/Output communication to get RTU data, set up polling and exception report of MTU/RTU, link the TU/RTU with Supervisory Computer and use Human Machine Interface (HMI) to optimize the operation of SCADA System.
SCADA MATERIAL OUTLINE PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION):
- Concept of SCADA System
- Software and Hardware of SCADA System
- MTU/RTU Configuration Set-up
- MTU/RTU Communication
- MTU/RTU Ladder Logic Programming
- Logic and Sequential Programming
- MTU/RTU PID controller Programming
- MTU/RTU Data Logging
- MTU/RTU Exception Reporting
- MTU/RTU System Redundancy
- Input/Output Server and HMI System
- HMI Operation and Programming
- Comprehensive Practice
TRAINING METHODES PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION):
- Tutorial
- Discussion
- Practice
FACILITIES USED:
- PLC
- Software and Hardware of SCADA System
- Miniature Plan
- HMI Panel
- MTU/RTU
INSTRUCTOR PELATIHAN SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION):
Instruktur yang mengajar pelatihan SCADA (Supervisory Control And Data Acquisition) ini adalah instruktur yang berkompeten di bidang SCADA (Supervisory Control And Data Acquisition) baik dari kalangan akademisi maupun praktisi.
Jadwal Pelatihan Transform-mpi.com 2025 :
- Batch 1 : 30 – 31 Januari 2025
- Batch 2 : 13 – 14 Februari 2025
- Batch 3 : 11 – 12 Maret 2025
- Batch 4 : 16 – 17 April 2025
- Batch 5 : 15 – 16 Mei 2025
- Batch 6 : 25 – 26 Juni 2025
- Batch 7 : 16 – 17 Juli 2025
- Batch 8 : 6 – 7 Agustus 2025
- Batch 9 : 3 – 4 September 2025
- Batch 10 : 8 – 9 Oktober 2025 || 29 – 30 Oktober 2025
- Batch 11 : 13 – 14 November 2025 || 25 – 27 November 2025
- Batch 12 : 15 – 16 Desember 2025
Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.
Biaya dan Lokasi Pelatihan :
- Jakarta :
- Bandung
- Yogyakarta
- Surabaya
- Malang
- Bali
- Lombok
Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.
Fasilitas Pelatihan di transform-mpi.com:
- Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
- Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
- Transportasi Peserta ke tempat pelatihan.
- 2x Coffe Break & 1 Lunch (Makan Siang).
- Training Room Full AC and Multimedia.
- Free Bag or Bagpackers (Tas Training).
- Softfile Foto Training
- Sertifikat Pelatihan.
- Souvenir Exclusive.
