PNEUMATIC CONVEYING

PELATIHAN PNEUMATIC CONVEYING

TRAINING PNEUMATIC CONVEYING

PNEUMATIC CONVEYINGOVERVIEW TRAINING PNEUMATIC CONVEYING

In this course, a review of gas/solids flow fundamentals is presented, including common pneumatic conveying problems, modes of transport in a pipeline, and how scale-model tests can be used to effectively design or evaluate systems that are operating poorly. Conveying line solids feeders are reviewed, as well as a discussion of proven pipeline layout rules and elbow/bend selection criteria.

One of the most important material-handling techniques in the chemical industry , cement Factory, Fertilizer Factories, Flour Mill are the movement of material suspended in a stream of air over horizontal and vertical distances ranging from a few to several hundred feet. Materials ranging from fine powders through 6.35-mm, (d-in) pellets and bulk densities of 16 to more than 3200 kg/m3 (1 to more than 200 lb/ft3) can be handled.

 

OBJECTIVES TRAINING PNEUMATIC CONVEYING
* Understand the advantages of pneumatic conveying systems over mechanical conveying
* Understand the characteristics, limitations and fundamental design differences of dilute phase, dense phase and air activated gravity conveying
* Understand the design approach and typical specifications of positive pressure, vacuum and combination pull-push dilute phase conveying systems
* Understand the factors influencing the performance of pneumatic conveying systems and learn how conveying rates are affected by distances
* Understand the terms “saltation” and “choking” as applicable to pneumatic systems
* Learn by example – the methodology for selection of prime mover for a dilute phase pneumatic conveying systems
* Gain understanding of pneumatic conveying system components such as fans, airlocks, separators, piping and filters
* Learn how to estimate pressure drop in dilute phase conveying system

 

COURSE CONTENTS TRAINING PNEUMATIC CONVEYING

* Flow patterns in bins and hoppers; bulk solids flow testing
* Flow properties and hopper design/troubleshooting
* Bulk solid feeders – screws, belts, rotary valves
* Fine powder handling phenomena
* Review of flow properties test report; silo design example
* Common segregation mechanisms for powders and solids
* Flow aid devices; transfer chute design
* Introduction, modes of conveying; types of systems
* Fundamentals of gas/solids flow; pressure loss calculations
* Component selection and system design
* Dense phase conveying; system troubleshooting

 

INSTRUCTOR TRAINING PNEUMATIC CONVEYING
* Teguh Pudji Purwanto, MT.
* Sigit Budi Hartono, ST., MT.

(Expert in mechanical engineering)

 

METHODS TRAINING PNEUMATIC CONVEYING
* Lecturing
* Discussion/Sharing
* Case Study
* Simulation
* Evaluation

 

Jadwal Pelatihan transform-mpi.com 2019;

  • 15 sd 16 Januari 2019
  • 29 sd 30 Januari 2019
  • 12 sd 13 Februari 2019
  • 26 sd 27 Februari 2019
  • 5 sd 6 Maret 2019
  • 19 sd 20 Maret 2019
  • 9 sd 10 April 2019
  • 23 sd 24 April 2019
  • 7 sd 9 Mei 2019
  • 21 sd 22 Mei 2019
  • 12 sd 13 Juni 2019
  • 25 sd 26 Juni 2019
  • 9 sd 10 Juli 2019
  • 23 sd 24 Juli 2019
  • 13 sd 14 Agustus 2019
  • 27 sd 28 Agustus 2019
  • 10 sd 11 September 2019
  • 24 sd 25 September 2019
  • 8 sd 9 Oktober 2019
  • 22 sd 23 Oktober 2019
  • 5 sd 6 November 2019
  • 21 sd 20 November 2019
  • 3 sd 4 Desember 2019
  • 17 sd 18 Desember 2019

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

 

Biaya dan Lokasi Pelatihan :

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
  • Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
  • Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp.6.800.000 / peserta(Minimal 2 Peserta).
  • Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta(Minimal 2 Peserta).
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
  • Lombok : Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

 

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.

Leave a Reply

Your email address will not be published. Required fields are marked *