GAS, OIL AND WATER HANDLING FACILITIES

PELATIHAN GAS, OIL AND WATER HANDLING FACILITIES

TRAINING GAS, OIL AND WATER HANDLING FACILITIES

GAS, OIL AND WATER HANDLING FACILITIESOBJECTIVES PELATIHAN GAS, OIL AND WATER HANDLING FACILITIES

After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
* Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

 

AUDIENCE TRAINING GAS, OIL AND WATER HANDLING FACILITIES

No specified (Operator/Sr. Operator/Engineer or Non Engineer)

 

COURSE OUT-LINE TRAINING GAS, OIL AND WATER HANDLING FACILITIES

1. Gas Handling Facilities
* Introduction to Gas Handling and Facilities
* Gas Properties

* Ideal gas
* Real Gas
* Gas Formation Volume Factor
* Gas Compressibility
* Gas-Water System
* Gas-Condensate System

* Gas Reservoir Performance

* Reservoir Gas Flow
* Gas Reserves
* Well Completion Effect
* Tight Gas Well
* Gas Well Testing

* Gas Piping System

* Basic Flow Equation
* Flow in Wells and Flow in Pipelines
* Effect of Liquids
* Use of Pressure Traverse Curve
* Liquid Removal from Gas Wells

* Gas Compression

* Type of Compressors
* Compressor Design
* Centrifugal Compressor

* Total System Analysis

* Tubing and Flow Line Effect
* Separator Pressure Effect
* Compressor Selection

* Flow Measuring

* Orifice Metering
* Metering System Design
* Other Metering Methods

* Gas Condensate Reservoir

* Well Testing and Sampling
* Gas Cycling

* Field Operation Problems

* Pressure Cumulative Production Plot
* Hydrate Formation
* Sour Gas Production
* Corrosion Control With Inhibitors
* Sulfur Deposition

* Gas Processing

* Field treatment of Natural Gas
* Gas Plant Operation
* Gas Dehydration
* Gas Sweetening

2. Oil Handling Facilities
* Oil Well Surface Production Equipment and Operation

* Oil Well Equipment
* Oil Well Production Operation
* Well Automatic Safety Device

* Oil Gathering System. Manifold and Flowline

* Oil Gathering System
* Manifold System
* Flow line Sizing and Design

* Crude Oil and Gas Separation

* Separator and Principle of Separation
* Design of Separator
* Oil Dehydration

* Principles of Measurement

* Introduction to Measurement
* Crude Oil Measurement
* Gas Measurement

* Well Test

* Introduction
* Responsibility for Test
* Preparation for Test
* Types of Well Test
* Equipment and Procedures
* Accuracy of Fluid Measurement
* Problem in Testing
* Type of Test

3. Water Handling Facilities
* The Chemistry of Water

* Chemical and Physical Properties
* Water Sampling Procedures
* Quantitative Analysis of Oilfield Waters
* Water Analysis Techniques

* Water Formed Scales

* Why Scales Form
* Predicting Scale Formation
* Mixing Waters – Compatibility
* Preventing Scale Formation
* Scale Removal Methods

* Corrosion in Water Injection System and Disposal System

* Theory of Corrosion
* The Effect of Metal Composition
* Effect of Water Composition
* Forms of Corrosion
* Corrosion Control Methods
* Corrosion Inhibitors
* Internal Coatings and Linings for Tubular Goods
* Internal Tank Coatings and Cathodic Protection
* Non-Metallic Tubular Goods Types
* Removal of Corrosive Gases from Water
* Oxygen Removal
* Removal of Hydrogen Sulfide from Water
* Removal of Carbon Dioxide from Water
* Oxygen Exclusion
* Design to Minimize Corrosion
* Corrosion Monitoring Techniques

 

INSTRUCTOR
1. Dr.Ir. Sudjati Rachmat, DEA

 

CO-INSTRUCTOR
2. Ir. Gilang Erlangga

 

Jadwal Pelatihan transform-mpi.com 2019;

  • 15 sd 16 Januari 2019
  • 29 sd 30 Januari 2019
  • 12 sd 13 Februari 2019
  • 26 sd 27 Februari 2019
  • 5 sd 6 Maret 2019
  • 19 sd 20 Maret 2019
  • 9 sd 10 April 2019
  • 23 sd 24 April 2019
  • 7 sd 9 Mei 2019
  • 21 sd 22 Mei 2019
  • 12 sd 13 Juni 2019
  • 25 sd 26 Juni 2019
  • 9 sd 10 Juli 2019
  • 23 sd 24 Juli 2019
  • 13 sd 14 Agustus 2019
  • 27 sd 28 Agustus 2019
  • 10 sd 11 September 2019
  • 24 sd 25 September 2019
  • 8 sd 9 Oktober 2019
  • 22 sd 23 Oktober 2019
  • 5 sd 6 November 2019
  • 21 sd 20 November 2019
  • 3 sd 4 Desember 2019
  • 17 sd 18 Desember 2019

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

 

Biaya dan Lokasi Pelatihan :

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
  • Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
  • Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp.6.800.000 / peserta(Minimal 2 Peserta).
  • Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta(Minimal 2 Peserta).
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
  • Lombok : Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor 0823-2382-3308 atau0853-2672-5665.

 

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.

Leave a Reply

Your email address will not be published. Required fields are marked *