FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

PELATIHAN FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

TRAINING FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

FURNACE: OPERATION AND OPTIMIZATION IN SAFETYDESCRIPTION PELATIHAN FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

To provide in-depth knowledge of furnace operation in the petroleum and petrochemical industries. The course places special emphasis on abnormal situations liable to lead to incidents and therefore addresses questions of safety arising from furnace operation. On completion of the course, the participants: have a better knowledge of industrial furnaces technology, operating conditions and constraints, and their signification; manage on stream operation rules in safety; know the main maximum operating values and material operating limits; have mastered these constraints for an optimal furnace.

 

OBJECTIVES TRAINING FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

* have a better knowledge of industrial furnaces technology, operating conditions and constraints, and their signification
* are able to identify the different operating constraints and their signification
* know the main maximum operating values and material operating limits
* have mastered these constraints for an optimal furnace operation in safety and fiability.

 

OUTLINES PELATIHAN FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

1. FURNACE CONSTRUCTION AND OPERATING CONDITIONS
* Different types of furnaces and their functions
* Operating conditions
* Distribution of heat supplied
* Furnace efficiency
* Estimation rule parameters governing furnace efficiency, scope and limitations for improving furnace efficiency.
* Construction of heat exchange areas, insulation, refractory materials: technology, type of materials used.

2. FLUE GAS CIRCULATION
* Natural draft: stack role, pressure profile inside a furnace
* Parameters governing draft and negative pressure control. Forced draft: draft fan role. Draft control.

3. COMBUSTION – FUEL – BURNERS
* Combustion conditions: heating value, liquid and gas fuel characteristics, liquid spray.
* Implementation of combustion: introduction of fuel and air, achieving their mixture, burner operation.
* Combustion quality: analysis of the oxygen and the unburned material in the flue gases, control of the combustion air flow rate, air-fuel constraints.
* Combustion safety: flame detection, control and safety devices on the fuel circuits.
* Combustion constraints and burner operation limits.

4. HEATING
* Heat transfer to the tube bundle: heat flux, tube temperatures, fouling effects. Parameters governing heat transfer: flue gas temperature and mass flow-fuel emissivity.
* Division of the heated fluid into several passes: control and regulation of the \ division, low flow rate safety systems.
* Heating control: flow constraints of the fuel at outlet temperature.

5. FURNACE OPERATION
* On-stream furnace operations: monitoring of combustion and heating – Modifying operating conditions – Analysis of disturbances – Stack sweeping.
* Startup and shutdown: preparation, safe ignition procedures, ignition after a short shutdown, normal shutdown, emergency shutdown. Incidents: explosive
* atmosphere in the combustion chamber, tube rupture, unbalancing, etc.

 

INSTRUCTOR

Dr. Herliansyah, ST., M.Eng

 

WHO SHOULD ATTEND
All personnel involved in furnace operation and optimization: operators, panelmen, supervisors and engineers.

 

METHOD TRAINING FURNACE: OPERATION AND OPTIMIZATION IN SAFETY

Lecturing, workshop, interactive discussion, sharing and case study.

 

Jadwal Pelatihan transform-mpi.com 2019;

  • 15 sd 16 Januari 2019
  • 29 sd 30 Januari 2019
  • 12 sd 13 Februari 2019
  • 26 sd 27 Februari 2019
  • 5 sd 6 Maret 2019
  • 19 sd 20 Maret 2019
  • 9 sd 10 April 2019
  • 23 sd 24 April 2019
  • 7 sd 9 Mei 2019
  • 21 sd 22 Mei 2019
  • 12 sd 13 Juni 2019
  • 25 sd 26 Juni 2019
  • 9 sd 10 Juli 2019
  • 23 sd 24 Juli 2019
  • 13 sd 14 Agustus 2019
  • 27 sd 28 Agustus 2019
  • 10 sd 11 September 2019
  • 24 sd 25 September 2019
  • 8 sd 9 Oktober 2019
  • 22 sd 23 Oktober 2019
  • 5 sd 6 November 2019
  • 21 sd 20 November 2019
  • 3 sd 4 Desember 2019
  • 17 sd 18 Desember 2019

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

 

Biaya dan Lokasi Pelatihan :

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
  • Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
  • Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp.6.800.000 / peserta(Minimal 2 Peserta).
  • Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta(Minimal 2 Peserta).
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
  • Lombok : Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor 0823-2382-3308 atau0853-2672-5665.

 

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.

Leave a Reply

Your email address will not be published. Required fields are marked *