PELATIHAN COATING SYSTEM AND PROTECTION CORROSION

TRAINING TENTANG COATING SYSTEM AND PROTECTION CORROSION

PELATIHAN COATING SYSTEM AND PROTECTION CORROSION

PELATIHAN COATING SYSTEM AND PROTECTION CORROSION

PENDAHULUAN PELATIHAN COATING SYSTEM AND PROTECTION CORROSION :

Korosi secara ekonomi sangat merugikan sehingga korosi dipandang menjadi masalah serius bagi kontruksi. Dibidang korosi persolaan yang muncul adalah bagaimana menganalisis, mencegah dan mengontrol korosi agar secara ekonomi tidak merugikan. Korosi adalah kerusakan material suatu produk atau komponen mesin dan peralatan yang disebabkan oleh reaksi kimia atau elektro kimia dengan lingkungannya. Lingkungan yang basah atau lembab seperti tercelup dengan air, tetesan embun di atas baja atau besi mempermudah terjadinya korosi. Begitu juga terjadinya reaksi kimia yang melibatkan perpindahan elektron (reaksi oksidasi dan reduksi). Oleh karena perlu dilakukan pengurangan yang bersifat pencegahan terhadap timbulnya korosi.

Korosi dapat menyerang logam atau material bukan logam dengan sangat cepat atau lambat. Dalam kondisi demikian hal yang penting adalah bagaimana menghambat, mencegah terjadinya korosi tersebut. Oleh karena itu hal yang terpenting bagi parencana industri adalah bagaimana meminimasi biaya maintenance, efek pencemaran lingkungan yang terjadi, kontaminasi produk, dan pengaruh terhadap keamanan dan kelayakan lingkungan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Coating System and Protection of Corrosion.

PESERTA PELATIHAN COATING SYSTEM AND PROTECTION CORROSION :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang coating system and protection corrosion pada industri rekayasa.

TUJUAN PELATIHAN COATING SYSTEM AND PROTECTION CORROSION :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian melakukan proses coating system and protection of corrosion.

CAKUPAN MATERI PELATIHAN COATING SYSTEM AND PROTECTION CORROSION :
1. Coal tar, bitumen and asphalt.
2. Polyethylene coating.
3. Epoxy coating.
4. Concrete wight coating.
5. Process tin coating.
6. Product specification.

Instruktur PELATIHAN COATING SYSTEM AND PROTECTION CORROSION

Ir.Sugeng Isdwiyanudi, MT. and Team
He was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing,
and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability
Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP
POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Jadwal Pelatihan Transform-mpi.com 2024 :

  • Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024
  • Batch 2 : 07 – 08 Februari 2024 | 20 – 21 Februari 2024
  • Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024
  • Batch 4 : 09 – 10 April 2024 | 13 – 24 April 2024
  • Batch 5 : 07 – 08 Mei 2024 | 22 – 23 Mei 2024
  • Batch 6 : 05 – 06 Juni 2024 | 25 – 29 Juni 2024
  • Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024
  • Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024
  • Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024
  • Batch 10 : 18 – 19 Oktober 2024 | 15 – 16 Oktober 2024
  • Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024
  • Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

  • Jakarta :
  • Bandung
  • Yogyakarta
  • Surabaya
  • Malang
  • Bali
  • Lombok

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

Fasilitas Pelatihan di transform-mpi.com:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.